Interior Lighting Design and Installation

Lighting Installation Nashville | Indoor & Outdoor Lighting Services

Recessed LED • Landscape Lighting • Chandelier Lifts • License #75168

Custom lighting design and expert installation for Davidson & Williamson County homes.



Nothing transforms the feel of a home faster than a professional lighting upgrade. If you are living in a historic home in East Nashville that relies entirely on dark, shadow-casting floor lamps, or you want to highlight the architecture of a new build in Brentwood with stunning exterior illumination, you need an electrician who understands both safety and design.

Bates Electric provides premium lighting installation in Nashville, TN. We don’t just swap lightbulbs. Our licensed electricians specialize in pulling new wiring through finished ceilings, installing modern wafer LED recessed cans without damaging drywall, and setting up high-end smart lighting control systems that you can operate from your phone.

✓ Recessed LED Retrofits – Brighten up dark kitchens and living rooms with energy-efficient wafer lights.
⚡ High-Ceiling Chandeliers – Safe, secure mounting for heavy light fixtures and motorized chandelier lifts.
📍 Landscape & Security Lighting – Low-voltage path lights, architectural uplighting, and motion floods.
💡 Smart Home Automation – Lutron Caséta, Philips Hue, and whole-home dimming controls.

Our Residential Lighting Services

Indoor Lighting
Indoor Recessed & Track Lighting
Eliminate shadows in your kitchen or basement. We precisely measure, cut, and wire ultra-thin LED recessed cans that fit safely under floor joists.
Chandelier and Fixture Installation
Chandeliers & Pendants
Hanging a 150lb fixture in a two-story foyer requires specialized bracing. We ensure heavy fixtures are anchored safely and wired to NEC code.
Smart Switches
Switches, Dimmers & Outlets
Upgrading to smart switches often requires a neutral wire that older Nashville homes lack. We can pull the necessary wiring to modernize your controls.

Outdoor Landscape & Security Lighting

The exterior of your home deserves the same attention to detail as the interior. A well-designed outdoor lighting system dramatically increases your property’s curb appeal, extends your outdoor living space well into the evening, and serves as one of the most effective deterrents against intruders.

We design and install low-voltage architectural uplighting to highlight stonework and trees, subtle pathway lighting for safe navigation, and hardwired motion-sensor security floods. Unlike cheap solar stakes that die after a year, our hardwired lighting systems deliver consistent, brilliant illumination every night, powered by a central waterproof transformer.

Outdoor landscape and architectural lighting

📝 Need Custom Lighting?

Get your free virtual quote today:






Licensed & Insured TN #75168

Workmanship Guarantee

Choosing the Right Lighting Color Temperature (Kelvin)

One of the biggest mistakes homeowners make is mixing mismatched light bulbs. The “warmth” or “coolness” of a light is measured in Kelvin (K). Here is a quick guide to selecting the right lighting fixtures for your home:

Color Temperature Appearance Best Rooms & Applications
2700K – 3000K Warm White / Soft Yellow Living Rooms, Bedrooms, Dining Rooms. Creates a cozy, relaxing, traditional atmosphere. Excellent for table lamps and chandeliers.
3500K – 4000K Neutral / Cool White Kitchens, Bathrooms, Garages. A bright, clean light that provides excellent visibility for tasks like cooking or applying makeup.
5000K+ Daylight / Blue-White Workshops, Security Floods, Basements. Highly energizing, stark white light designed for maximum visibility and high-contrast environments.
BE HONEST: WHEN NOT TO CALL US

When You Shouldn’t Call Us

If you just need someone to climb a ladder and screw in a dead lightbulb, or if you bought a $20 battery-powered stick-on light from Amazon, you don’t need a licensed electrical contractor. A general handyman is a more cost-effective choice for those minor tasks.

However, if you need new electrical wiring pulled through your ceiling to install recessed cans, a 150lb chandelier securely braced and mounted in a two-story foyer, or a hardwired smart-home lighting system integrated with your breaker panel—you need Bates Electric.

Why Choose Bates Electric for Lighting Installation

Safe, Damage-Free Wiring

Retrofitting lights into an existing ceiling requires skill. Our electricians use specialized fish tape and flexible drill bits to snake wires through your ceiling joists and wall cavities with minimal to no drywall patching required afterward.

📋 Code-Compliant Support

Ceiling fans and heavy light fixtures cannot be hung on standard plastic electrical boxes—they will eventually tear out of the ceiling. We install heavy-duty, fan-rated steel brace boxes secured directly to your joists to ensure total safety.

Frequently Asked Questions

Can you install recessed lighting if there is no attic access above the room?
Yes! We frequently install ultra-thin “wafer” LED lights in lower-level rooms (like living rooms beneath second-story bedrooms). Because these LEDs don’t have large metal “cans,” they can be mounted directly to the drywall, avoiding conflict with plumbing or floor joists.
Why do my new LED lights flicker when I dim them?
Flickering usually happens when you pair modern LED bulbs with an old incandescent dimmer switch. Old dimmers lower voltage differently than LEDs require. We can replace your old switches with modern, LED-compatible dimmers to eliminate the flickering and buzzing.
Do you install motorized chandelier lifts?
Yes. For homes in Belle Meade and Franklin with massive foyers or grand staircases, we install motorized hoist systems hidden in the attic. This allows you to lower your heavy chandelier down to floor level with a key switch for easy cleaning and bulb replacement.

Our Installation Process

Lighting Design and Installation Process
  1. Design & Layout: We measure your space, discuss your illumination goals, and map out the exact placement for new fixtures to eliminate shadows.
  2. Wiring & Prep: Our technicians run new copper wiring from your breaker panel and install heavily-braced ceiling boxes.
  3. Fixture Mounting: We hang the fixtures, align the recessed trims, install the transformers for outdoor lighting, and wire the switch legs.
  4. Final Testing: We test all dimmers for flickering, verify the voltage, ensure motion sensors are calibrated, and clean up our workspace.

Serving the Nashville Metro Area

Our licensed lighting installation contractors dispatch daily across Davidson and Williamson counties.

Brentwood & Franklin

High-end landscape lighting installations, motorized chandelier lifts, and smart home lighting integrations for luxury estates.

East Nashville & 12 South

Updating historic homes with modern LED recessed lighting while carefully snaking wires to preserve original lath-and-plaster ceilings.

Green Hills & Belle Meade

Artistic picture lighting, sophisticated dining room fixture installations, and architectural exterior uplighting.

Mount Juliet & Hermitage

Security lighting, motion floods, and converting outdated fluorescent kitchen boxes to clean, bright recessed LED arrays.

Ready to Transform Your Home with Beautiful Lighting?

Get expert lighting installation from licensed electrical contractors who deliver quality solutions. Free virtual quotes, transparent pricing, professional results you can count on.

Expert Design & Install • 💳 Financing Options • Licensed & Insured TN #75168

Scroll to Top